31 - 40 of 230
go and not go gauge
Selling leads
|
... Lampholders. TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the ...
2026-08-03 16:26:40
|
|
...gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - ...
2026-08-03 16:26:42
|
|
...gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check ...
2025-09-04 18:15:36
|
|
...Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the ...
2025-09-04 18:15:40
|
|
... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, ...
2025-09-04 18:15:41
|
|
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ...
2025-09-04 18:15:23
|
|
... holder. Testing: the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in ...
2025-09-04 18:15:38
|
|
GX53 Lamp cap gauge | "GO" and "NOT GO" Gauge For Caps GX53 | 7006-142-1 PURPOSE: To check caps GX53-.. in the following respects: ...
2026-08-03 16:26:42
|
|
GU10 Lamp cap gauge | Go and not go gauge for bases GU10 | 7006-121-1 PURPOSE: To check the base GU10 in the following respects: - the diameter of the ...
2026-08-03 16:26:44
|
|
...gauges for screw threads of lampholders E14 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and dimension X ...
2025-09-04 18:15:34
|