E26d Lamp Cap Gauge Screw Thread Gauge iec 60061 3 With Calibration Certificate
|
Detailed Product Description
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 10.4mm For E26d Caps On Finished Lamps E26d-7006-29d-1
PURPOSE: To check dimensions Cmax. and C1max. of caps E26d.
TESTING: When the unmounted cap has been pushed into the gauge as
far as it will go, surface W of the plunger shall not project
beyond surface X. For caps on finished lamps, surface W shall
not project beyond surface V. In this instance, the cap shall
be so positioned that the solder on the intermediate
Related gauges:
|
|||||||
| Product Tags: Go No Go Gauge Iec 60061 3 |
Related Products
|
IEC_62133-2 21A_620e_FDIS Small Cell And Battery Equipment With Calibration Certificate |
|
E40 Lamp cap gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 |
|
E40 Lamp cap gauge | Not go gauges for screw threads of lampholders E40 | 7006-26-4 |
|
E40 Lamp cap gauge | Go gauges for screw threads of lampholders E40 | 7006-25-7 |
|
GU10 Lamp cap gauge | Go and not go gauge for bases GU10 | 7006-121-1 |
|
GX53 Lamp cap gauge | "NOT GO" Gauge For Checking Keyways in Caps GX53 | 7006-142F-1 |
Email to this supplier