Cutting Edges E27 Lamp Holder Gauge For Detecting Side Contacts
|
|
E27 Lampholder Gauges | Gauge for Detecting Side-contacts with Cutting-Edges in Lampholders E27 | 7006-22B-1
Purpose:
to detect the existance of cutting-edges on side-contact in E27 lamp holder.
Testing:
the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in a horizontal position and the plunger-face is held against the helder contacts. In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions. After this test the combination is placed with the plunger in a vertical position and the plunger-face is pressed against the holder contacts with a total force of 10N. In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions. The lampholder complies if the torque applied for both tests does not exceed 0.4Nm.
Related gauges for E27 lamp holder:
|
|||||||||||||||
| Product Tags: Go No Go Gauge Iec 60061 3 |
|
E27-7006-22C-1 Gauge I For Checking Side-Contact Resiliency In Lampholders |
|
Gauge For Testing Protection Against Bulb-Neck Damage And For Testing Contact-Making In Lampholders E27-7006-22a-5 |
|
E27-7006-21-5 Gauge For Testing Protection Against Bulb-Neck Damage And For Testing Contact-Making In Lampholders |
|
DIN-VDE0620-1 Lamp Cap Gauge For Measuring German Standard Plug And Socket |
|
7006-28A-1 E27 Lamp Cap Gauge / NOT GO Gauge For E27 Caps On Finished Lamps |
|
E26d Lamp Cap Gauge Screw Thread Gauge iec 60061 3 With Calibration Certificate |