41 - 50 of 214
go and not go gauge
Selling leads
|
GU10 Lamp cap gauge | Go and not go gauge for bases GU10 | 7006-121-1 PURPOSE: To check the base GU10 in the following respects: - the diameter of the ...
2025-06-20 20:17:28
|
|
...gauges for screw threads of lampholders E14 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and dimension X ...
2025-06-20 20:17:41
|
|
... GU10. To check for proper acceptance of "maximum" GU10 lamp bases. Testing: it shall be possible to insert each end of the gauge in turn ...
2025-06-20 20:17:44
|
|
...been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W ...
2025-06-20 20:17:44
|
|
...Socket Gauge For Measuring German Standard Plug And Socket Product information: The gauges conforms to the standard of DIN-VDE0620-1.It is ...
2025-06-20 20:17:48
|
|
7006-52-1 Lamp cap gauge for finished lamps fitted with E40 caps for testing contact making Standard E40 Lamp cap gauge 7006-52-1 gauge for finished ...
2025-06-20 20:17:34
|
|
...Gauge for Testing Contact-Making and Protection Against Accidental Contact During Insertion of Lamps in Lampholders The drawing is intended only to ...
2025-07-01 21:23:51
|
|
IEC60061-3: 7006-22C-1 E27 Gauge I for Checking Side Contact Resiliency in Lampholders For details of gauge II, see sheet 7006-22D. The conical part ...
2025-07-01 21:23:51
|
|
DIN-VDE0620-1:2021 Bild 16a temperature rise plug gauge Prufestecker 2P+AC 16A DIN-VDE0620-1 plug and socket gauge Figure number Project name Qty DIN...
2025-06-20 20:17:39
|
|
E27 Lampholder gauges | Gauge For Testing Contact-making and Protection Against Accidental Contact During Insertion Of Lamps in Lampholdes E27-7006...
2025-06-20 20:17:45
|