1 - 10 of 108
iec61032 jointed test finger
Selling leads
|
..., UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is ...
2025-07-24 00:11:45
|
|
... against access to hazardous parts. The jointed test finger is also used to verfiy the protection against access with a finger. It is design ...
2024-12-09 19:16:17
|
|
IEC61032 UL507 Jointed Test Finger / Test Probe B for IP2X with 10N Thruster 1. Introduction: Test probe B ( jointed test finger) is design according ...
2024-12-09 18:35:02
|
|
...two active joints that can bend in 90 degrees and made by insulating material, the handle can customized with terminals or M6 threaded hole to work ...
2024-12-09 18:49:48
|
|
...This probe is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with ...
2024-12-09 18:22:24
|
|
...Test Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 ...
2024-12-09 20:08:06
|
|
...Test Probe Kits IP Test Finger Probe Packed in Silver Box 1. Introduction: The test probe kits are used to verify the degrees of protection ...
2024-12-09 19:58:25
|
|
.... The standard test finger probe is intended to verify the basic protection against access to hazardous parts and also be used to verify the ...
2025-07-24 00:11:45
|
|
...IEC61032 / IEC60950 Test Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 ...
2024-12-09 19:16:17
|
|
IEC61032 Unjointed Test Finger Probe / Rigid Test Finger / Test Probe 11 with 0~50N Thruster 1. Introduction: Test probe 11 (unjointed test finger) is ...
2024-12-09 18:35:34
|