21 - 30 of 108
iec61032 jointed test finger
Selling leads
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2025-07-31 00:11:44
|
Calibrated Child Small Finger Probe φ8.6mm / Test Probe 18 IEC61032 1. Standard conforms to :IEC61032 figure 12, IEC60335-1, UL1017 and etc. 2. ...
2024-12-09 19:16:17
|
...Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of ...
2024-12-09 19:02:04
|
.... 2. Test Sample of IP3X Test Finger Probe: Easily accessible enclosure live parts or mechanical parts. 3. Introduction of IP3X Test Finger Probe: ...
2024-12-09 18:51:55
|
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of ...
2024-12-09 23:54:34
|
..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the ...
2025-07-31 00:11:44
|
Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This ...
2024-12-09 18:22:24
|
IEC61032 Test Finger Probe Test Probe C Test Rod for IP3X Testing 1. Introduction of Test Probe C: Designed according to IC61032 figure 3, meet the ...
2025-07-31 00:11:44
|
IEC61032 Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is ...
2024-12-09 18:22:24
|
...Test Probe Kit Contains Jointed Finger Probe Rigid Test Finger Ball Pressure Test Apparatus ect. The PG-60950 contains the devices listed in the ...
2024-12-09 18:44:06
|