11 - 20 of 108
iec61032 jointed test finger
Selling leads
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
|
...Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. This bar is ...
2024-12-09 18:22:24
|
|
Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin ...
2024-12-09 18:22:24
|
|
Test Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 8. This ...
2024-12-09 18:22:24
|
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
IEC61032 Test Finger Probe 1 Diameter 50mm Steel Ball with CNAS Certificate Introduction: Designed according to IEC61032 figure 5, meet the requiremen...
2025-07-30 00:07:26
|
|
Children Small Finger Test Probe Kits / IEC61032 Test Probe 19 1. Introduction: Test probe 19 (child small finger probe) is designed according to ...
2025-07-30 00:07:26
|
|
Test Bar and Test Wire According to IEC61032 Test Probes 14 and 17 Made by Metal and Nylon 1. Test Probe 14 Introduction: Test probe 14 (Test bar : 3...
2024-12-09 18:35:34
|
|
...etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against ...
2024-12-09 18:22:24
|