91 - 100 of 108
iec61032 jointed test finger
Selling leads
|
20N / 1N Test Probes According to IEC60884-1 Figure 9 and Figure 10 for Socket - Outlet 1. Introduction of Socket-outlet test probes: The probes are ...
2024-12-09 18:22:24
|
|
IEC60598-1 1.1m Test Chain Made by 63% Cu and 37% Zn with CNAS Calibration Certificate 1. Introduction of Test Chain: Test chain is designed according ...
2024-12-09 18:22:24
|
|
75g Fragmentation Test Hammer with Tungsten Carbide Tip for Glass According to IS015717 1. Introduction The test hammer for fragmentation test having ...
2024-12-09 19:01:16
|
|
Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet ...
2024-12-09 22:53:48
|
|
Wedge Probe Designed according to IEC60950 for Paper Shredder Inlet 1. Introduction Wedge probe is designed according to UL60950 figure NAF.2 and NAF...
2024-12-09 18:22:24
|
|
Hardened Steel Pin with Tip Radius R0.25 and 30N Force According to IEC60335-1 clause 21.2 1. Standard Conforms to : IEC60950 clause 2.10.8.4 and ...
2024-12-09 18:54:54
|
|
...Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 ...
2024-12-09 21:48:21
|
|
... A for IP1X test is intended to verify the protection of persons against access to hazardous parts. Test probe B for IP2X test is intended to ...
2025-07-31 00:11:44
|
|
IEC61010-1 Clause 8.2.1 12mm Hemispherical Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufacture...
2025-04-26 07:40:05
|
|
...designed according to EN30-1-1 Annex C.1 and table C.1. The test pans are made of commercial quality aluminum with density of 2700kg/m2, and use a ...
2024-12-09 18:56:04
|