81 - 90 of 108
iec61032 jointed test finger
Selling leads
|
...Test Probe for Uninsulated Live Part Conforms to UL507 Introduction UL accessiliby test probe for uninsulated live part is designed according to ...
2024-12-09 18:22:24
|
|
... live parts UL1278 (PA130A) Probe for film-coated wire of fan UL507 (PA135A) 3. Specification Rigid finger length 101.6mm (4 inch) Rigid finger ...
2024-12-09 22:53:32
|
|
... to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05. Test probe 1 is for IP1X testing, it means for ...
2024-12-09 18:35:02
|
|
Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to ...
2024-12-09 18:22:24
|
|
...-2-100 figure 1 and IEC50636-2, it is simulate the young adult finger to check the protection against to hazardous moving parts of hand-held mains...
2025-07-31 00:11:44
|
|
PG-PA145 Lab Testing Equipment UL Test Rod Probe meet the requirements of UL982 Standard 1. Introduction of UL Test Rod Probe The UL test rod probe is ...
2024-12-09 18:49:01
|
|
IEC60065 Test plug for Antenna Coaxial Socket with Third-Lab Calibration Certificate 1. Introduction The test plug is designed according to IEC60065 ...
2024-12-09 18:22:24
|
|
IEC60529 Stainless Steel Test Probe A with 50mm Test Sphere for IP1 Code Test Introduction: This probe is intended to verify protection of persons ...
2024-12-09 18:42:57
|
|
IEC 62916 Electric Vehicle Socket-Outlets Gauge A with 20N and B with 1N for Checking Shutters Test Probes 1. Introduction of Gauge A and B test ...
2024-12-09 23:54:34
|
|
Control Panel for Accessibility Test Set Electrical Contact Indicator for Probe Testing Introduction The electrical contact indicator is designer ...
2024-12-09 18:22:24
|