1 - 10 of 112
accessibility test thruster finger
Selling leads
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
|
... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ...
2024-12-09 18:22:24
|
|
Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin ...
2024-12-09 18:22:24
|
|
...Accessibility Test Probe for Uninsulated Live Part Nylon Handle + Stainless Steel Finger 1. Description: UL accessiliby test probe for uninsulated ...
2024-12-09 18:44:59
|
|
Test Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 8. This ...
2024-12-09 18:22:24
|
|
Articulate Probe with Web Stop / UL Articulated Finger Probe for Accessibility Test / Jointed Test Probe 1. Standard Conforms to: UL858 figure 6.1, ...
2025-07-15 00:08:42
|
|
... live parts UL1278 (PA130A) Probe for film-coated wire of fan UL507 (PA135A) 3. Specification Rigid finger length 101.6mm (4 inch) Rigid finger ...
2024-12-09 22:53:32
|
|
...Accessibility Test Set Electrical Contact Indicator for Probe Testing Introduction The electrical contact indicator is designer according to the ...
2024-12-09 18:22:24
|
|
... 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical ...
2024-12-09 18:35:34
|
|
... is mainly used for the puncture-proof test of the accessible part of the solid insulation, also it is used to test whether the non-removable parts ...
2024-12-09 18:35:34
|