31 - 40 of 112
accessibility test thruster finger
Selling leads
|
...Test Probes 1. Introduction of Gauge A and B test probes: The gauge A and B test probes are strictly designed according to IEC62196-1-2022 clause ...
2024-12-09 23:54:34
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2025-07-16 00:08:56
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to ...
2025-07-16 00:08:56
|
|
Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This ...
2024-12-09 18:22:24
|
|
... access to hazardous parts by children of more than 36 months and less than 14 years 3. Application range: Accessible enclosure live parts or ...
2024-12-09 19:16:17
|
|
... Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against ...
2024-12-09 18:42:57
|
|
... against access with a tool. Meets IEC and EN Standards including IEC 60529 for IP4 and suffix D codes. The handle and stop face are made of Delrin...
2024-12-09 18:42:57
|
|
...Child Finger Probes / IEC61032 Test Probe 18 and 19 Made by Metal and Nylon 1. Test probe 18 1). Introduction Test probe 18 ( Child small finger ...
2025-07-16 00:08:56
|
|
Children Small Finger Test Probe Kits / IEC61032 Test Probe 19 1. Introduction: Test probe 19 (child small finger probe) is designed according to ...
2025-07-16 00:08:56
|