21 - 30 of 112
accessibility test thruster finger
Selling leads
|
...Accessability Test Probe as Per UL1278 (PA140A) and UL507 (PA170D) 1. Standard conforms to UL507 (PA170D) , UL1278 (PA140A) , UL398 (PA170B) 2. ...
2024-12-09 22:53:32
|
|
...Test Finger Probe and Short Test Pin Probe The test finger probe and short test pin probe are designed according to IEC61032 standard. The test ...
2024-12-09 19:16:17
|
|
..., UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is ...
2025-07-16 00:08:56
|
|
...accessibility to live parts of socket-outlets and vehicle connectors. Meanwhile, it also be called as test probe B or jointed test finger in ...
2025-07-16 00:08:56
|
|
...Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 figure ...
2024-12-09 18:22:24
|
|
... figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The ...
2024-12-09 18:22:24
|
|
.... 2. Test Sample of IP3X Test Finger Probe: Easily accessible enclosure live parts or mechanical parts. 3. Introduction of IP3X Test Finger Probe: ...
2024-12-09 18:51:55
|
|
...Accessibility Test Probe for Uninsulated Live Part Conforms to UL507 Introduction UL accessiliby test probe for uninsulated live part is designed ...
2024-12-09 18:22:24
|
|
...This probe is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with ...
2024-12-09 18:22:24
|
|
...etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against ...
2024-12-09 18:22:24
|