41 - 50 of 112
accessibility test thruster finger
Selling leads
|
...simulate access to hazardous parts by children of more than 36 months and less than 14 years. Specification of Small Child Finger Probe: Diameter ...
2025-07-17 00:10:03
|
|
...Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is intended ...
2024-12-09 18:22:24
|
|
... the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal ...
2024-12-09 18:30:49
|
|
...Test Probe Wire Equipped with 42V Electrical Indicator IEC60529 1. Standard of IP40 Test Probe Wire IEC61032 and IEC60529 etc. 2. Test Sample of ...
2024-12-09 18:53:22
|
|
Test Bar and Test Wire According to IEC61032 Test Probes 14 and 17 Made by Metal and Nylon 1. Test Probe 14 Introduction: Test probe 14 (Test bar : 3...
2024-12-09 18:35:34
|
|
Test Bar Probe 43 Person Against Access to Hot or Glowing Parts Introduction: It is designed according to IEC61032 figure 17. This bar is intended to ...
2024-12-09 18:22:24
|
|
...Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4...
2024-12-09 18:39:54
|
|
...IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of ...
2024-12-09 18:51:55
|
|
...Test Probe with CNAS Calibration Certificate Standards This telecom test probe is designed according to the standard of IEC60950, IEC60065, ...
2025-07-17 00:10:03
|
|
...requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to ...
2025-07-17 00:10:03
|