91 - 100 of 112
accessibility test thruster finger
Selling leads
|
...Hardened Steel Pin for Accessible Parts 1. Introduction Abration resistance tester ( scratch tester ) is designed according to IEC60950 clause 2.10...
2024-12-09 18:34:35
|
|
75g Fragmentation Test Hammer with Tungsten Carbide Tip for Glass According to IS015717 1. Introduction The test hammer for fragmentation test having ...
2024-12-09 19:01:16
|
|
Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet ...
2024-12-09 22:53:48
|
|
IEC61010-1 Clause 8.2.1 12mm Hemispherical Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufacture...
2025-04-26 07:40:05
|
|
...Test Probe A and Test Probe 2 / Test Spheres Φ50mm and Φ12.5mm 1. Introduction: IP code probe is a test probe to verify the degrees of protection ...
2024-12-09 19:16:17
|
|
...requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to ...
2024-12-09 18:35:02
|
|
...Test Chain with Resistance Value of 2.5Ω/m±20% 1. Usage 1). The resitance value of the test chain should be checked before measurement to make sure ...
2024-12-09 18:50:48
|
|
...-1 clause 21.2, a hardened steel pin is used as a electrode during the dielectric strength test. After the scracth test, the device should work ...
2024-12-09 21:57:15
|
|
Test Probe 41 Conforms to IEC61032 and IEC60065 with CNAS Certificate Introduction: It is designed according to IEC61032 figure 16, and meet the ...
2024-12-09 18:22:24
|
|
... is for checking non-accessibility live part through shutters, 1N test probe is for checking non-accessibility live part through shutters and live ...
2024-12-09 19:45:42
|