31 - 40 of 199
4 layer pcb immersion gold finish
Selling leads
|
...Immersion Gold RF PCB 1.27mm 2 Layer Circuit Boards This style of PTFE/woven fiberglass/ceramic filled laminate AD1000 material is used to create ...
2026-05-27 18:51:40
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-05-27 18:51:34
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-05-27 18:51:37
|
|
...PCB DK4.5 with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) General Description ...
2026-05-27 18:50:31
|
|
... PCB measures 170mm x 90mm with a tolerance of +/- 0.15mm and the minimum trace width and spacing are 4 mils (0.1mm). The overall thickness of the ...
2026-05-27 18:52:09
|
|
...layer rigid high-frequency PCB fabricated with Wangling TF300 high-performance dielectric substrate, designed for high-stability microwave and ...
2026-06-24 15:01:25
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-05-27 18:53:52
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-05-27 18:54:05
|
|
PCB with Ball Grid Array 10-Layer BGA PCB Built On High Tg FR-4 With Immersion Gold (Printed circuits boards are custom-made products, the picture and ...
2026-05-29 14:59:25
|