81 - 90 of 199
4 layer pcb immersion gold finish
Selling leads
|
...PCB is a 2-layer rigid board, constructed with Rogers DiClad 870 (a woven fiberglass reinforced, PTFE-based composite) as its base material, ...
2026-05-27 18:51:23
|
|
...Immersion Gold Double Sided High Temperature PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for ...
2026-05-27 18:53:57
|
|
... for reference) General Description This is a type of double sided wrap-around antenna PCB built on 20mil substrate, cladding 0.5oz copper plated ...
2026-05-27 18:54:27
|
|
Rogers High Frequency PCB Built On RO4730G3 20mil 0.508mm DK3.0 With Immersion Gold for Cellular Base Station Antenna (Printed Circuit Boards are ...
2026-05-27 18:50:27
|
|
...shown are just for reference) General description This is a type of 4 layer flexible printed circuit for the application of Wireless Intercom at 0...
2026-05-29 15:00:06
|
|
... for reference) General description This is a type of flexible printed circuit with stainless steel stiffener on the top side. It’s for the ...
2026-05-29 15:00:05
|
|
...just for reference) General description This is a type of flexible printed circuit for the application of antenna. It’s a 2 layer FPC at 0.2mm ...
2026-05-29 15:00:05
|
|
...PCB on Polyimide With Immersion Gold and 3M Tape and PI Stiffener Supplied Mass Production (Flexible printed circuits are custom-made products, the ...
2026-05-29 15:00:04
|
|
...PCB Single-End Impedance Circuit Board 10 Layer PCB Board Satellite systems 1.1 General description This is a type of multilayer PCB built on FR-4 ...
2026-05-27 18:53:45
|
|
Single Layer Flexible Printed Circuit on Polyimide with 2oz Copper Yellow Coverlay and Immersion Gold for Capacitive Screen (Flexible printed circuits ...
2026-05-29 15:00:07
|