71 - 80 of 332
medical testing connector gauge
Selling leads
|
ISO 80369-7 Figure C.2 Male Reference Luer Slip Connector and C.4 Male Luer Reference Connector ISO 80369-7 C.4 Male Luer Reference Connector ...
2026-08-08 00:21:26
|
|
..., tables, figures, and annexes of which have been consolidated and technically revised. Because of this, ISO 594 connections must be tested per ISO ...
2026-08-03 16:27:53
|
|
...gauge | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact E14-7006-55-2 Purpose: to check protection ...
2025-09-04 18:15:35
|
|
...gauge | Gauge for testing protection against bulb-neck damage and for testing contact-making in lampholders E40-7006-23-3 Purpose: to check the ...
2025-09-04 18:15:36
|
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the ...
2026-08-08 00:21:26
|
|
... holder. Testing: the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in ...
2025-09-04 18:15:38
|
|
... of cotton medical gauze. The test piston shall have the dimensions specified in Figure 5 and shall be made of an elastic material which is inert ...
2025-09-04 18:15:33
|
|
...gauge | Gauge for finished lamps fitted with E14 caps for testing contact making | 7006-54-2 Purpose: to check lamp dimensions for contact making ...
2025-09-04 18:15:34
|
|
...gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact making in ...
2026-08-03 16:26:38
|
|
...lamps. TESTING: When the lamp has been pushed into the gauge as far as it will go with the side solder of the cap located in the recess provided, ...
2025-09-04 18:15:37
|