111 - 120 of 486
medical device testing gauge
Selling leads
|
...gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - ...
2026-08-03 16:26:42
|
|
...gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check ...
2025-09-04 18:15:36
|
|
...Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the ...
2025-09-04 18:15:40
|
|
... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, ...
2025-09-04 18:15:41
|
|
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ...
2025-09-04 18:15:23
|
|
... holder. Testing: the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in ...
2025-09-04 18:15:38
|
|
... at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and ...
2025-09-04 18:16:53
|
|
...axial strength of the cap does not decrease when the unmounted cap was assembled to the finished lamp, test results on the unmounted cap can be ...
2025-09-04 18:21:26
|
|
... Application: It is used to test the bending moment effect of the semi-luminaires on the lampholders, in order to prevent the damage of the ...
2026-08-03 16:25:09
|
|
IEC 60695-11-3 Flame height gauge, 500 W flames The IEC 60695-11-3 Flame Height Gauge is designed for precise measurement of 500 W flames, ensuring ...
2026-08-03 16:23:16
|