101 - 110 of 486
medical device testing gauge
Selling leads
|
ISO5356-1 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate ...
2026-08-03 16:24:36
|
|
...gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check ...
2026-08-03 16:26:40
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2026-08-03 16:26:41
|
|
...gauge | Go gauges for screw threads of lampholders E40 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and ...
2026-08-03 16:26:44
|
|
...: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished ...
2025-09-04 18:15:26
|
|
...the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surgace T. ...
2025-09-04 18:15:34
|
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-09-04 18:15:34
|
|
...contact(s) of lampholder shall be electrically connected with the gauge as shown in the circuit. with the central rod in the upper position, the ...
2025-09-04 18:15:36
|
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 23mm For Caps E26d | 7006-29B-2 PURPOSE To check dimensions Smin., Smax., S1min. and S1max. of ...
2025-09-04 18:15:37
|
|
IEC 60601-1Grips and other handling devices-7 cm strap tester Carrying handles or grips furnished on PORTABLE ME EQUIPMENT shall withstand loading as ...
2026-08-08 00:21:26
|