241 - 250 of 485
led driver testing equipment
Selling leads
|
...-1 Clause 8.2.2 Figure 10 Steel Sphere Drop Impact Testing Machine for Medical Electrical Equipment 1. Introduction The steel sphere drop impact ...
2025-04-26 07:40:05
|
|
...Testing Equipment Test Probe D for IP4X Testing Test Wire According to IEC60529 Introduction: Designed according to IEC61032 figure 4, meet the ...
2024-12-09 18:22:24
|
|
IEC60598-1 Clause 4.14.1 (Test E) Clip-Mounted Luminaires Test Device 1. Introduction The clip test device is designed to meet the test requirement of ...
2024-12-09 20:28:11
|
|
IP Testing Equipment Test Probe B for IP2X Testing Jointed Test finger Introduction: Design according to IEC61032 figure 2, meet the requirements of ...
2024-12-09 18:22:24
|
|
IEC60598-1 Clause 4.14.1 Test B Suspended Luminaire Torque Test Device 1. Introduction The suspended luminaire torque test device is designed to meet ...
2024-12-09 20:28:11
|
|
... of vertically dripping and dripping with 15 degrees tilted, and then to check if the products ( electronics, luminaire, electric components, auto ...
2024-12-09 18:22:24
|
|
...provided a prevent the impairing of safety due to unintended short-circuiting of uninsulated accessible SELV part of opposite polarity. The test ...
2024-12-09 18:22:24
|
|
..., EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal for mechanical impact testing. The device can be adjusted back and ...
2024-12-09 18:22:24
|
|
...Test Equipment 1. Introduction RK2682 Insulation resistance tester is sepcial designed according to IEC, BS and UL standards, the test voltage has ...
2024-12-09 18:39:18
|
|
IEC60598-1 Clause 4.14.2 Bending Moment Test Device for Semi-Luminaires 1. Introduction The test device is designed to meet the test requirement of ...
2024-12-09 20:28:11
|