251 - 260 of 543
led driver testing equipment
Selling leads
|
IP Testing Equipment Test Probe B for IP2X Testing Jointed Test finger Introduction: Design according to IEC61032 figure 2, meet the requirements of ...
2024-12-09 18:22:24
|
|
IEC60598-1 Clause 4.14.1 Test B Suspended Luminaire Torque Test Device 1. Introduction The suspended luminaire torque test device is designed to meet ...
2024-12-09 20:28:11
|
|
... of vertically dripping and dripping with 15 degrees tilted, and then to check if the products ( electronics, luminaire, electric components, auto ...
2024-12-09 18:22:24
|
|
...provided a prevent the impairing of safety due to unintended short-circuiting of uninsulated accessible SELV part of opposite polarity. The test ...
2024-12-09 18:22:24
|
|
..., EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal for mechanical impact testing. The device can be adjusted back and ...
2024-12-09 18:22:24
|
|
...Test Equipment 1. Introduction RK2682 Insulation resistance tester is sepcial designed according to IEC, BS and UL standards, the test voltage has ...
2024-12-09 18:39:18
|
|
IEC60598-1 Clause 4.14.2 Bending Moment Test Device for Semi-Luminaires 1. Introduction The test device is designed to meet the test requirement of ...
2024-12-09 20:28:11
|
|
...Test Equipment Single Wire Vertical Flammability Tester 1. Introduction DZ-3 single wire vertical flammability test apparatus is designed according ...
2024-12-09 18:22:24
|
|
... Y.5.3/ figure Y.2, meets the requirement of UL498, UL1598, UL153, UL154B, UL103, UL8750, UL1741, UL514B, UL1278, UL1571 and etc. The water spray ...
2024-12-10 00:38:13
|
|
...Test Chamber with TEMI880N Controller The PG-TSC three-box thermal shock chamber is engineered specifically for evaluating material performance ...
2026-04-08 07:30:19
|