271 - 280 of 485
led driver testing equipment
Selling leads
|
... a standard required conditions for temperature rising test of electric appliance.The Black Test Corner is used for the measurement of the ...
2024-12-09 19:58:25
|
|
...nominal wire diameter of which is 50μm and the nominal width of a gap between wires 75 μm. IP5X test: the protection is satisfactory if the power ...
2024-12-09 20:02:00
|
|
...Testing and Leakage Detection 1. Introduction High pressure leak testing machine can meet the requirement of IEC60529 for IPX8 testing and IEC60598...
2024-12-09 21:05:43
|
|
...-2-13, GB/T 5169.13, IEC62368-1 Section 6.3.1, IEC60598-1 Section 13.3.2, IEC60335-1 Section 30.1. It is widely used in material testing on lamps, ...
2025-04-25 12:32:49
|
|
...Testing Needle Flame Test Apparatus 1. Introduction The needle flame test apparatus is designed according to the requirements of IEC 60695-11-5, GB...
2025-04-25 12:32:48
|
|
IEC61010-1 Flammability Testing Tracking Index Test Device 1. Introduction The tracking index test device is designed according to the standards IEC ...
2025-04-27 00:06:27
|
|
... to test the load-bearing capacity of equipment brackets that are intended to be installed on walls or ceilings. 2. Standard IEC61010-1 Medical ...
2025-04-26 07:40:05
|
|
... equipment during the tests from heating and abnormal operation. One is designed and made with the intention of determining the fulfillment of ...
2024-12-09 18:28:53
|
|
...Test 1. Introduction LSG-6K10 Lighting Surge System is confirmed to IEC61000-4-5 and GB/T17626.5. It is the equipment used for Anti-Surge ...
2024-12-09 18:53:22
|
|
...test chamber High Temperature High Pressure for Auto Parts 1. Introduction IPX9K testing is the most strictly IP rating, it is applied to test all ...
2025-07-26 00:07:09
|