Clip Mounted Luminaires Test Device IEC60598-1 Clause 4.14.1 10mm Thickness
|
IEC60598-1 Clause 4.14.1 (Test E) Clip-Mounted Luminaires Test Device
1. Introduction The clip test device is designed to meet the test requirement of IEC 60598-1 clause 4.14.1 (test E), it is applied for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is mounted on standard test "shelves" made of ordinary window glass, one with a nominal thickness of 10 mm and one with the maximum thickness onto which the clip can be mounted. For this test the thickness of the test shelf is increased by multiples of 10 mm. The clip shall not start moving on the glass at a pull of 20 N. 2). Clip-mounted luminaires shall, in addition, be tested on the metal rod having a polished chromium plated finish and a nominal diameter of 20 mm. The luminaire shall not rotate under its own weight and shall not fall off the rod when a pull of 20 N is applied on the cable. The test on a polished metal rod is not applied to luminaires marked "not suitable for mounting on tubular material".
2. Parameters
|
||||||||||||||||
Product Tags: Clip Mounted Luminaires Test Device Clause 4.14.1 Luminaires Test Device 10mm Thickness Led Luminaires Tester |
![]() |
Protable Visible LED Spectrometer 380nm to 780nm to Measure Color Temperature and Lux |
![]() |
Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1 |
![]() |
380V 50Hz LED Testing Equipment For Recessed Luminaires Static Torque And Shear Loads |
![]() |
5 Inch Touch Screen Lampcaps Digital Torque Meter For E26/E27 E14 B22d G5/G13 E40 |
![]() |
5 Inch Touch Screen Digital Torque Meter For Lampcaps E26/E27 , E14 , B22d , G5/G13 And E40 |
![]() |
Suspended Luminaire Torque Test Device IEC60598-1 Clause 4.14.1 Test B PLC |