41 - 50 of 154
vehicle connector mechanical strength testing equipment
Selling leads
|
...2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, ...
2026-05-03 00:14:57
|
|
... clause 26.4 table 14, IEC 60309-1:2012 clause 24.4 figure 9, and related standards. It is intended for conducting mechanical load flexing tests on ...
2026-05-03 00:14:57
|
|
...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of ...
2026-05-03 00:14:57
|
|
... 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new ...
2026-05-03 00:14:57
|
|
...Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or ...
2026-05-03 00:14:57
|
|
..., connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 ...
2026-05-03 00:14:57
|
|
10KN Tensile Strength Test Machine With Computer Control Tensile Strength And Deformation Test Product information: This machine adopts computer ...
2026-05-03 00:14:57
|
|
...e adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the ...
2026-05-03 00:14:57
|
|
...-1: 2022 clause 33. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being ...
2026-05-03 00:14:57
|
|
...62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or ...
2026-05-03 00:14:57
|