51 - 60 of 164
vehicle connector mechanical strength testing equipment
Selling leads
|
...-1: 2022 clause 33. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being ...
2026-09-08 00:29:59
|
|
...62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or ...
2026-09-08 00:29:58
|
|
... Breaking Capacity test machine conforms to the standard requirements of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 ...
2026-09-08 00:29:59
|
|
....3, fig 15, table 8 and table 9, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as ...
2026-09-08 00:29:59
|
|
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle ...
2026-06-11 18:48:35
|
|
... socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC 61851-1:2017 clause ...
2026-09-08 00:29:59
|
|
Vehicle Connectors Plugs Breaking Capacity and Normal Operation Testing Machine PLC Control Standards & Clauses: IEC62196-1: 2014 “Plug, socket...
2026-06-11 18:48:29
|
|
...mechanical performance and service life of toilet seats and covers used in intelligent toilet appliances and sanitary products. This equipment ...
2026-09-08 00:29:59
|
|
... 60309-1: 2012 clause 22, etc. It is suitable for detecting the temperature rise test after the charging pile interface plug and socket pass the ...
2026-06-11 18:48:35
|
|
...Vehicle Charging Interface Cable Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The ...
2026-09-08 00:29:59
|