IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
|
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
System introduction:
The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc.
Accessories wired with the minimum size cable of a type recommended by the manufacturer shall be placed on a concrete floor in any normal position of rest. A crushing force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15 or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar. The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.
Applied standard:
IEC 62196-1: 2022 clause 33. IEC 62752:2016 clause 9.34
Structure:
The entire equipment adopts a cold-rolled steel plate protective box structure design. The surface of the box is treated with Teflon paint. The bottom of the box is covered with simulated cement floor. The rolling mechanism can simulate a car tire sliding up and down freely after rolling over an object. The charging pile plug bear the same pressure. The driving device drives the rolling mechanism to achieve forward and backward rolling movements. The main components are made of stainless steel and aluminum parts. Ensure that the tire is rolling over the sample under normal rolling conditions. The main features are as follows: 1. The equipment chassis is equipped with a protective cover to ensure the safety of the test process. The bottom of the box is equipped with shock-absorbing foot pads and a pulley structure for easy installation and disassembly. Guided by heavy-duty slide rails, the roller set slides. The power combined with a high -power motor combined with the turbine reducer, driving the spindle rotation, and the test speed is promoted for crushing test. The specimen fixing device is equipped with an installation fixture for functional box of the specimen to meet standard requirements. 2. The drive over pressure adjustment device is designed with an upper and lower adjustable structure. The tires, upper and lower sliding frames and counterweights borne by the specimen are the total weight of the test. 3. The equipment adopts the working mode of front and rear tire drive: the drive over direction is driven by the forward and reverse rotation of the motor to drive the tire rolling. Keep the specimen stationary. It can simulate the reciprocating rolling of car tires in the most realistic way. Effectively simulate rolling of the specimen. 4. The control system is an independent organization. The host machine is controlled by PLC and operated by touch screen. There are fixed mounting holes and cable openings at the bottom for easy fixing and connection.
Technical Parameters:
The equipment adopts the working mode of front and rear driving of the tire (the direction of rolling is driven by the positive and negative rotation of the servo motor), keeping the sample fixed, achieve the most realistic simulation of the reciprocating rolling of the automobile tire, thus effectively carrying out simulated crushing on the specimen.
|
||||||||||||||||||||||||||||||||||
Product Tags: IEC 62196 Vehicle Plugs Testing Equipment 11000N Drive Over Vehicle Tester |
![]() |
UL 2594 Clause 58 Charging Interface Vehicle Rolling Tester 5000/11000N Load Capacity |
![]() |
Dual-Arm Tensile Strength Test Machine with 3kN/5kN Sensors & Deformation Device |
![]() |
Tensile Strength Test Equipment 50KN With Deformation Extensometer Customized test stroke |
![]() |
BS1363-1 Screwless Terminals Thermal Stress Tester For Electrical And Thermal Stresses Test |
![]() |
10KN Tensile Strength Test Machine With Computer Control Tensile Strength And Deformation Test |
![]() |
IEC 62196-3 EV Plug Mechanical Lock Endurance Test Equipment For Charging Interfaces Testing |