71 - 80 of 226
1n force test probe
Selling leads
|
...Test Pin For Impulse Voltage Test Probe Diameter 1mm Product information: The test pin conforms to BS1363-1: clause 12.6.1 b), figure 1, BS1363-2 ...
2026-06-11 18:51:58
|
|
... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. ...
2026-06-11 18:48:32
|
|
... is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: Metal ...
2026-06-11 18:50:06
|
|
...DC Anti-Shock Probe Experiment Device Used With The Testing Probe IEC 62196-1 Product information: This equipment meets the requirements of IEC ...
2026-06-11 18:51:42
|
|
...Test Probe Product Overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.2 and figure V.1, UL474 Fig 5...
2026-06-11 18:50:03
|
|
IEC 62196-1 New Energy Vehicle Socket Withdrawal Force Test Apparatus Product overview: This withdrawal force test apparatus is required by IEC 62196...
2026-06-11 18:48:40
|
|
Small Test Probe Of UL498 Figure 132.1 plug and socket test gauge Product Overview: This test probe is designed and manufactured according to UL 498 ...
2026-06-11 18:51:44
|
|
...terminals with UL 496:2013 Clause 5.1.3 requirements. It is widely used in electrical safety testing laboratories and quality inspection department...
2026-06-11 18:52:22
|
|
IEC 62196-1 EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment Product Information For EV Charging Plug And Socket Withdrawal ...
2026-09-08 00:29:59
|
|
...Test Probe Product overview: The Joint Test Probe of Figure meets the standard requirements of UL507 Fig 9.2 (PA100A), IEC 62368-1:2018 clause 4.8, ...
2026-06-11 18:50:33
|