IEC 62196-1 New Energy Vehicle Socket Withdrawal Force Test Apparatus
|
|
IEC 62196-1 New Energy Vehicle Socket Withdrawal Force Test Apparatus
Product overview: This withdrawal force test apparatus is required by IEC 62196-1Ed.4CDV 2020 clause 16.16. Test principle: The fixed accessory (the socket-outlet or vehicle inlet) is mounted such that the mating accessory moves vertically downward into it during the first stage of insertion. A principal weight of 9,2 kg is suitably placed on the mating accessory. If the moving accessory does not enter the fixed accessory to the position required, a supplementary weight of 0,8 kg is allowed to fall from a height of 5 cm onto the principal weight. The moving accessory shall then enter the fixed accessory to the position required to engage the contacts properly.
This product is designed to test whether the maximum force required for pulling a plug out of a socket or connecting appliance and the minimum force required for pulling a single pole plug out of a socket assembly is within the range specified in the standard.
Technical parameters:
|
||||||||||
| Product Tags: Vehicle Socket Withdrawal Force Test Apparatus IEC 62196-1 Force Test Apparatus Withdrawal Force Test Apparatus |
|
UL 2594 Clause 58 Charging Interface Vehicle Rolling Tester 5000/11000N Load Capacity |
|
Dual-Arm Tensile Strength Test Machine with 3kN/5kN Sensors & Deformation Device |
|
Tensile Strength Test Equipment 50KN With Deformation Extensometer Customized test stroke |
|
BS1363-1 Screwless Terminals Thermal Stress Tester For Electrical And Thermal Stresses Test |
|
10KN Tensile Strength Test Machine With Computer Control Tensile Strength And Deformation Test |
|
IEC 62196-3 EV Plug Mechanical Lock Endurance Test Equipment For Charging Interfaces Testing |