1 - 10 of 206
1n force test probe
Selling leads
|
...Annex V.1.6 The Test Rod Probe with 1N Force Product information: This probe conforms to the standard requirement of IEC61032 test probe D, ...
2024-12-09 20:37:44
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2024-12-09 22:49:27
|
|
... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing application...
2025-07-01 19:18:46
|
|
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the ...
2025-03-06 22:30:42
|
|
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, ...
2025-07-01 19:18:46
|
|
... 7 test probe 11, etc. Samples and Restrictions: Non-detachable parts of household appliances, electrical accessories, lamps, etc. Application: It ...
2024-12-09 19:27:07
|
|
...Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 ...
2024-12-09 19:38:34
|
|
...Test Probe Product overview: The unjoint test probe of figure V.1 conforms to the requirements of IEC 62368-1:2018 clause V.1.3 and figure V.1 (but ...
2024-12-09 21:01:33
|
|
...Test Probe 18 Ф8.6mm Children Finger Probe Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.1.3, IEC ...
2024-12-09 21:14:33
|
|
...Test Probe 19 Ф5.6mm Children Finger Probe Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 13 test probe 19, ...
2024-12-09 21:14:33
|