IEC 61032 Figure 9 Test Probe 13 With Nylon Handle M6 Thread Hole
|
|
IEC 61032 Figure 9 Test Probe 13 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 figure 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment.
Probe Dimension:
Operation: Please refer to the relevant standards. Take IEC 60335-1 clause 8.1.2 as an example: Test probe 13 of IEC 61032 is applied without appreciable force through openings in class 0 appliances, class II appliances and class II constructions, except for those giving access to lamp caps and live parts in socket-outlets.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:
|
||||||||||||||
| Product Tags: Figure 9 Test Probe 13 IEC 61032 Test Probe 13 |
|
IEC60947-1 Tensile Strength Test Machine With Test Range 50KN Adopts Computer Control |
|
IEC 60947-1 Double Column Digital Display Tensile Testing Machine For Test Threadless Terminals |
|
ASTM D-412 Dumbbell Test Piece Punching Machine Punching stroke ≥120-150MM |
|
Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device |
|
IEC 60669-1 Switch And Plug-Socket Endurance Tester With 3 Independent Work Stations |
|
IEC 60227-5 Flexing Test Apparatus For PVC Insulated Flexible Cables Testing PLC Control |