1 - 10 of 176
iec 61032 test probe 13
Selling leads
|
IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC ...
2026-06-11 18:42:03
|
|
IEC 61032 Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC ...
2026-06-11 18:42:04
|
|
IEC 61032 Test Probe 11 With Equipped 75 N Force Dynamometer Safety Compliance Tool Product Overview: The IEC 61032 Test Probe 11 equipped with a 75 N ...
2026-06-11 18:43:57
|
|
...h as IEC 60529, IEC 60335-1, IEC 60065 for IP1 testing. This Test Probe 1 is used to verify the enclosure's level of protection against the ...
2026-06-11 18:50:58
|
|
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of ...
2026-06-11 18:40:54
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2026-06-11 18:53:18
|
|
... This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access ...
2026-06-11 18:53:18
|
|
... is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: Metal ...
2026-06-11 18:50:06
|
|
... 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and ...
2026-06-11 18:50:34
|
|
... to simulate access to hazardous parts by children of 36 months or less. Probe Dimension: Hemispherical radius (mm) R2.8±0.05 Finger probe diameter ...
2026-06-11 18:50:06
|