11 - 20 of 60
ro4533 immersion gold surface finished pcb
Selling leads
|
... for reference) General Description This is a type of double sided wrap-around antenna PCB built on 20mil substrate, cladding 0.5oz copper plated ...
2026-04-13 05:31:19
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-04-13 05:31:19
|
|
Brief Introduction This is a four-layer board made of polyimide material with a finished thickness of 1.3mm and 1oz finished copper on each layer (See ...
2026-04-13 05:31:19
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-04-13 05:31:19
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-04-13 05:31:19
|
|
...just for reference) General Description This is a type of antenna PCB made on Rogers RO4535 with 30mil substrate, starting 0.5oz copper, finished ...
2026-04-13 05:31:19
|
|
50mil AD1000 Immersion Gold RF PCB 1.27mm 2 Layer Circuit Boards This style of PTFE/woven fiberglass/ceramic filled laminate AD1000 material is used ...
2026-04-13 05:31:19
|
|
Taconic TLF-35 High Frequency PCB with 30mil, 60mil Thick Coating Immersion Gold, HASL, Immersion Silver and Tin (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|
|
...Immersion Gold Double Sided High Temperature PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
...and bottom side.Pads are plated with electroless nickel and immersion gold (ENIG). Every 50 boards are vaccum packed for shipment. PCB Specificatio...
2026-04-13 05:31:19
|