51 - 60 of 60
ro4533 immersion gold surface finished pcb
Selling leads
|
...PCB is a two-layer rigid PCB fabricated using Rogers RT/duroid 6002, a ceramic-filled polytetrafluoroethylene (PTFE) microwave laminate distinguish...
2026-04-21 13:33:20
|
|
...PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz copper weight, along with a finished board thickness of 1.8mm and a ...
2026-04-13 05:31:19
|
|
...PCB) is constructed using Rogers RO3010 as its core substrate and features an Immersion Silver surface finish. Equipped with a 1oz (1.4 mils) ...
2026-04-13 05:31:19
|
|
...PCB uses RT duroid 5880 high-frequency laminates integrated with High Tg 170°C FR-4 as its material, delivering superior high-frequency signal ...
2026-04-13 05:31:19
|
|
...PCB 50 Ohm Impedance Circuit Board Matt Blue PCB for Audio Adapter 1.1 General description This is a type of matt blue PCB built on FR-4 substrate ...
2026-04-13 05:31:19
|
|
... dielectric thickness. The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen ...
2026-04-13 05:31:19
|
|
... we’re talking about a type of 10-layer hybrid PCB built on RO4350B and FR-4. This board is used for high gain applications. The board actually is ...
2026-04-13 05:31:19
|
|
...PCB With Pure Gold Plated. (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General ...
2026-04-13 05:31:19
|
|
... uniform dielectric performance and ultra-low loss, ideal for Ku-band and millimeter-wave applications. This PCB features a finished thickness of 0...
2026-04-21 13:33:19
|
|
...the outer layers, a final board thickness of 1.5mm, and a via plating thickness of 20 μm, this PCB delivers consistent electrical performance and ...
2026-04-13 05:31:19
|