121 - 130 of 715
pcb board ro3003g2
Selling leads
|
Dual Layer Flexible Printed Circuit Board on Polyimide With Yellow Mask and PI Stiffener for Thin-film Switch (Flexible printed circuits are custom...
2026-04-13 05:31:19
|
|
Substrate Introduction Rogers DiClad 527 laminates are composite materials reinforced with woven fiberglass for use as substrates in printed circuit ...
2026-04-13 05:31:19
|
|
... with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 1 up PCB per ...
2026-04-13 05:31:19
|
|
... high frequency PCBs are made from all high frequency material inclusive of prepreg adhesive. For example, a 4-layer RO4350B PCB is a compound of 2 ...
2026-04-13 05:31:19
|
|
... track. It's 3.7 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on pads. This is also an impedance ...
2026-04-13 05:31:19
|
|
...PCB 3W / MK High Thermal Conductivity MCPCB for RGB Lighting (PCB’s are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 10mil 0.254mm with Immersion Gold for Filters and Couplers etc. (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
Rogers RT/duroid 5880 high frequency material is glass microfiber reinforced PTFE composites which is designed for exacting stripline and microstrip ...
2026-04-13 05:31:19
|
|
High Frequency PCB Built on Taconic RF-35TC DK3.5 With 60mil Thick and Immersion Gold for Power Amplifier (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|
|
Taconic TLF-35 High Frequency PCB with 30mil, 60mil Thick Coating Immersion Gold, HASL, Immersion Silver and Tin (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|