541 - 550 of 551
immersion silver rf pcb
Selling leads
|
Substrate Introduction Rogers DiClad 527 laminates are composite materials reinforced with woven fiberglass for use as substrates in printed circuit ...
2026-04-13 05:31:19
|
|
Introduction to TU-768 The TU-768 and its variant, TU-768P, are manufactured using high-quality woven E-glass combined with an advanced epoxy resin ...
2026-04-13 05:31:19
|
|
Introduction to RT/duroid 5880 The RT/duroid 5880 is a high-frequency laminate that combines PTFE with glass microfibers. This composite material is ...
2026-04-13 05:31:19
|
|
Wangling's F4BM217 is a high-performance composite laminate engineered for advanced RF and microwave applications. It is manufactured through a ...
2026-04-13 05:31:19
|
|
TLX-8 delivers consistent and dependable performance across a broad spectrum of RF applications. Its versatility stems from a customizable 2.45–2.65 ...
2026-04-17 16:32:08
|
|
...PCB based on the advanced AD250 material, specifically designed for commercial microwave and RF applications. The AD250C laminate offers a tightly ...
2026-04-13 05:31:19
|
|
...just for reference) This is a 4-layer RO4350B high frequency PCB built on 2 10mil cores, bonded by 1 sheet of RO4450Fprepreg. As per the requiremen...
2026-04-13 05:31:19
|
|
... layer flexible circuit built on PET substrate, 1oz copper weight on each layer. The FPC is coating with white solder mask and immersion gold on ...
2026-04-13 05:31:19
|
|
...s FPC is a single sided strips with 2-meter long, 1oz copper with tesa tape on back side, white coverlay and immersion gold on the pads. It is ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|