331 - 340 of 509
immersion gold ceramic pcb
Selling leads
|
Immersion Silver PCB on 0.4mm FR-4 ITEQ 4 Layer Circuit Board for Security Systems 1.1 General description This is a type of 4 layer printed circuit ...
2026-04-13 05:31:19
|
|
Immersion Silver PCB On 1.0mm Epoxy Glass ITEQ FR-4 2 Layer Circuit Board for USB Charger 1.1 General description This is a type of 2 layer printed ...
2026-04-13 05:31:19
|
|
Introduction to RT/Duroid 6035HTC Rogers RT/Duroid 6035HTC is a high-frequency circuit material that combines ceramic-filled PTFE composites, making ...
2026-04-13 05:31:19
|
|
...PCB 2-layer Immersion Tin Finish This 2-layer rigid PCB is crafted from Taconic TLX-9, a PTFE/woven glass laminate. This material is highly valued ...
2026-04-13 05:31:19
|
|
...PCB Built On 8mil 0.203mm RO4003C and FR-4 for Phased Array Antennas (PCB’s are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
... RO3003 high-frequency laminate as the base material, this PCB is tailored for commercial microwave and RF applications. RO3003 is a ceramic-filled ...
2026-04-13 05:31:19
|
|
...PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion Silver (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz copper weight, along with a finished board thickness of 1.8mm and a ...
2026-04-13 05:31:19
|
|
...PCB) is constructed using Rogers RO3010 as its core substrate and features an Immersion Silver surface finish. Equipped with a 1oz (1.4 mils) ...
2026-04-13 05:31:19
|
|
...PCB is a 2-layer rigid board, constructed with Rogers DiClad 870 (a woven fiberglass reinforced, PTFE-based composite) as its base material, ...
2026-04-13 05:31:19
|