501 - 509 of 509
immersion gold ceramic pcb
Selling leads
|
Flexible Printed Circuit (FPC) Built on 1oz Polyimide with Gold Plated and PI Stiffener for Modem USB (Flexible printed circuits are custom-made ...
2026-04-13 05:31:19
|
|
Introduction to Rogers RO4830 The Rogers RO4830 is a high-frequency laminate that has been specifically engineered to address the challenges faced in ...
2026-04-13 05:31:19
|
|
...PCB Built on 6.15 DK RF-60TC 10mil, 20mil, 30mil and 60mil Coating with Immersion Gold, Tin, HASL and OSP for Miniaturized Antenna (Printed Circuit ...
2026-04-13 05:31:19
|
|
...just for reference) This is a 4-layer RO4350B high frequency PCB built on 2 10mil cores, bonded by 1 sheet of RO4450Fprepreg. As per the requiremen...
2026-04-13 05:31:19
|
|
... of 60mil (1.524mm) and immersion gold plating, the TLF-35 PCB is designed to provide excellent peel strength for 1/2 ounce and 1 ounce copper, ...
2026-04-13 05:31:19
|
|
... layer flexible circuit built on PET substrate, 1oz copper weight on each layer. The FPC is coating with white solder mask and immersion gold on ...
2026-04-13 05:31:19
|
|
...s FPC is a single sided strips with 2-meter long, 1oz copper with tesa tape on back side, white coverlay and immersion gold on the pads. It is ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|
|
...Gold Plated and 2 Meters Long for Telemetry System (Flexible printed circuits are custom-made products, the picture and parameters shown are just ...
2026-04-13 05:31:19
|