181 - 190 of 199
4 layer pcb immersion gold finish
Selling leads
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-05-27 18:53:09
|
|
...just for reference) This is a 4-layer RO4350B high frequency PCB built on 2 10mil cores, bonded by 1 sheet of RO4450Fprepreg. As per the requiremen...
2026-05-27 18:54:00
|
|
...PCB 10 Layers 10-layer Quality Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed ...
2026-05-29 14:59:28
|
|
... single layer MCPCB board at 1.6 mm thick with 1 W/MK thermal conductivity. The aluminum plate is from ITEQ, Solder mask and silkscreen from Taiyo. ...
2026-05-29 14:59:50
|
|
Dual Layer High Frequency PCB Built On 1.5mm PTFE (Teflon) with 3oz Copper and Immersion Gold (PCB's are custom-made products, the picture and ...
2026-07-08 14:41:00
|
|
... finished lamination thickness, the PCB features dual-side green solder mask with white legend and hard electrolytic gold plating. Sized 127mm...
2026-07-17 10:28:24
|
|
This rigid 2-layer RF PCB utilizes Rogers RT/duroid 6006, a premium ceramic-PTFE composite engineered for microwave and high-frequency circuitry. ...
2026-05-29 14:59:19
|
|
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss ...
2026-05-27 18:54:42
|
|
...PCB Half Holes Circuit Boards Built On 1.6mm FR-4 With Blue Solder Mask (Printed circuits boards are custom-made products, the picture and ...
2026-05-29 14:59:31
|
|
...PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion Silver (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:54:26
|