171 - 180 of 199
4 layer pcb immersion gold finish
Selling leads
|
...layer hybrid PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz copper weight, along with a finished board thickness ...
2026-05-29 15:00:49
|
|
...layer rigid printed circuit board (PCB) is constructed using Rogers RO3010 as its core substrate and features an Immersion Silver surface finish. ...
2026-05-27 18:51:23
|
|
...PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-05-27 18:51:34
|
|
...PCB Differential Impedance Circuit Board 8 Layer PCB for Wireless HDMI 1.1 General description This is a type of 8 layer printed circuit board ...
2026-05-27 18:53:43
|
|
...PCB 24 Layer Printed Circuit Board Built On High Temperature FR-4 With 50 Ohm / 100 Ohm Impedance for Industrial controls General description This ...
2026-05-29 14:59:30
|
|
... on FR-4 substrate with Tg 135°C for the application of GPS Tracking. It's only 0.6 mm thick without silkscreen on green solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
Taconic TLF-35 High Frequency PCB with 30mil, 60mil Thick Coating Immersion Gold, HASL, Immersion Silver and Tin (PCB's are custom-made products, ...
2026-05-27 18:54:39
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-06-09 09:54:59
|
|
...substrate with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
...PCB 0.8mm Thick 2-Layer 1OZ with Immersion Gold This high-performance 2-layer rigid PCB is crafted from TSM-DS3, a ceramic-filled reinforced ...
2026-05-27 18:51:11
|