121 - 130 of 170
single mode optical oscilloscope
Selling leads
|
U9210A 10G Full Rate BERT No. Parameter Min Type Max Unit 1 Data rate 0.622 0.622,1.25,2.125,2.488,2.5,3.07,3.125,4.25, 5.0,6.144,6.25,7.5,8.5 ,9.953...
2024-12-09 20:59:46
|
|
400G PM4 BERT High Speed Optical Transceiver Module Test Equipment Product characteristics Code type switch: Ordinary error detectors can only produce ...
2025-06-22 04:02:20
|
|
Single-Ended Clock Output 10G Full Rate Error Meter Summary of full rate error meter: The full rate error meter is an instrument used to measure the ...
2025-06-27 21:04:44
|
|
...Optical Oscilloscope (10G full-rate Optical Oscilloscope) is an instrument designed for the measurement of 10Gbps full-rate optical signals. It is ...
2025-07-04 19:14:43
|
|
U9740B 56Gbaud PAM4 CDR No. Specifications Max. Min. Unit. 1 Data rate range 64 25 Gbps/Gbaud 2 Wavelength range(single mode) 1650 1250 nm 3 Optical ...
2024-12-09 20:59:46
|
|
...optical/electrical clock recovery module supports a range of 155MBd to 11.3GBps, 10G full rate 4 frequency division, and provides standard clock ...
2025-07-04 19:14:40
|
|
...oscilloscope tests optical eye pattern and waveform, it needs to be triggered by the same source as the measured signal. CDR (clock recovery) ...
2025-07-01 13:25:09
|
|
... clock, so as to use the sampling oscilloscope to test the optical eye diagram of the device. The typical application is the testing of optical ...
2024-12-09 21:39:21
|
|
... as to use the sampling oscilloscope to test the optical eye diagram of the device. The typical application is the testing of optical network ...
2025-07-04 19:14:40
|
|
... as to use the sampling oscilloscope to test the optical eye diagram of the device. The typical application is the testing of optical network ...
2025-07-04 19:14:32
|