Full Rate 10Gbps CDR Clock Recovery Module Adaptive Rate
|
UC9710B Full Rate 10Gbps CDR Clock Recovery Module Adaptive rate
UC9710 CDR (Clock Recovery Module ) is mainly used to provide clock
recovery signal in the test environment without triggering clock,
so as to use the sampling oscilloscope to test the optical eye
diagram of the device. The typical application is the testing of
optical network equipment or the BOB product in PON application.
Because the photometric device itself has no frequency division
clock output, it is necessary to recover the clock signal to
trigger the sampling oscilloscope when testing the optical eye
diagram.
Specification
When sampling oscilloscope tests optical eye pattern
and waveform, it needs to be triggered by the same source as the
measured signal. CDR (clock recovery) module is mainly used in the
test environment that requires sampling oscilloscope to test
optical eye map, but does not provide trigger clock. Typical
application is the test of optical network equipment, or for BOB
products in PON application, because the measured optical equipment
itself does not have a frequency division clock output. The clock
signal needs to be recovered to trigger the sampling oscilloscope
when testing the optical eye pattern.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: CDR Clock Recovery Module Full Rate 10Gbps Clock Recovery Module |
![]() |
10G Four Channel Bit Error Tester BERT Support 9.953Gbps 10.3125/10.519/10.702/11.096/11.317Gbps |
![]() |
10G Full Rate Data Error Transmission Tester Error Analysis And Detection Fault Tester BERT |
![]() |
Module Auto Test System OLT SFP SFP+/XFP ONU Speed 10G Or Less |
![]() |
32 Gbaud PAM4 CDR PON/BOB Test Support 25GBaud~32GBaud |
![]() |
100Gbps Multi - Frequency Division Clock Recovery Instrument |
![]() |
Full Rate Single Mode / Multimode Optical Oscilloscope |