41 - 50 of 85
iec 61032 test probe b
Selling leads
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
...: 13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4 The object probe is pushed against any openings of the enclosure with the ...
2024-12-09 13:08:07
|
|
...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 ...
2024-12-09 17:40:48
|
|
...hazardous parts and solid foreign objects from entering. Confirm to standards: IEC 60529 IP1X; EN 60529 IP1X; IEC 61032 Figure 1; IEC60065 and so ...
2024-12-09 12:01:19
|
|
... with a wire. Confirm to standards: IEC 60529 IP4X; EN 60529 IP4X; IEC 61032-1 Figure 4; IEC 60065 and so on. Test sample: Easily accessible ...
2024-12-09 12:01:19
|
|
...the IEC61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules ...
2024-12-09 13:39:37
|
|
...Test Finger Probe Test Finger Probe B With Force Of 10N , 20N , 30N Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, ...
2024-12-09 13:07:16
|
|
...Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The ...
2024-12-09 13:12:04
|
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test ...
2024-12-09 13:07:58
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|