31 - 40 of 81
iec 61032 test probe b
Selling leads
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test ...
2024-12-09 13:14:54
|
|
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or ...
2024-12-09 12:31:11
|
|
IP Testing Equipment IP Test Probe Kit Jointed Test Finger and Test Rod Application of IP Testing Equipment: IP Test Probe Kit is a set of tools used ...
2024-12-09 22:22:12
|
|
... finger specified in IEC 60529. The finger is pressed against the surface with a force of 30 N. During the test, metal parts shall not touch live ...
2024-12-09 13:18:46
|
|
... probe is pushed against any openings of the enclosure with the force specified in table 7. First character- istic numeral Test means (object ...
2024-12-09 13:13:06
|
|
IEC60335-2-24 Clause 21.102 Test Finger Probe 75mm±5mm Spheroid Probe Test Standard:IEC60335-2-24 Clause 21.102 and IEC60335-2-30 Clause 11.8. ...
2024-12-09 13:05:09
|
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
... is given in table 1 . Other IEC publications should refer to a test probe of this standard by means of its code (column 2) and short description ...
2024-12-09 13:28:15
|
|
...: 13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4 The object probe is pushed against any openings of the enclosure with the ...
2024-12-09 13:08:07
|
|
...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 ...
2024-12-09 17:40:48
|