51 - 60 of 85
iec 61032 test probe b
Selling leads
|
...Test Pin For Information Technology Equipment Pin Length 15mm Handle Length 20mm IEC60065 clause 9.1.1 For CLASS II constructions, the test probe ...
2024-12-09 19:07:30
|
|
IEC 1010 / IEC60335-2-25 Test Finger Probe Probe length with 100±0.2 Product information of Test Finger Probe Probe: This testing probe is used for ...
2024-12-09 22:42:21
|
|
...ough the tip of a straight unjointed test finger, test probe 11 of IEC 61032. This finger with an electrical indicator as described above is ...
2024-12-09 13:51:51
|
|
...Probe Product information: This testing probe is used to verify the protection against access to hazardous parts through top openings. It meets IEC...
2024-12-09 10:47:48
|
|
... is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a ...
2024-12-09 12:31:11
|
|
... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where ...
2024-12-09 10:47:48
|
|
.... It is used for interlocking apparatus of the covert door of microwave oven. Customizable: it can be used for anti-electric shock test when it is ...
2024-12-09 10:47:48
|
|
... in any direction relative to the opening: − with a force up to 45 N for a strip-cut type device; and − with a force up to 90 N for a cross-cut ...
2024-12-09 13:14:44
|
|
... standard test tool fully compliant with IEC 61010, IEC 60065, EN 61010-1, UL 3101-1 and CSA 1010-1. It verifies protection against access to ...
2026-04-08 07:30:36
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|