IEC60529 IP2X Ingress Protection Test Equipment Test Probe 2 With Force

IEC60529 IP2X Ingress Protection Test Equipment 12.5mm Test Probe 2 With Force of 30N

Standard description:

IEC 60529

13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4
The object probe is pushed against any openings of the enclosure with the force specified in table 7.

13.3 Acceptance conditions for first characteristic numerals 1 , 2, 3, 4
The protection is satisfactory if the full diameter of the probe specified in table 7 does not pass through any opening.
NOTE For first characteristic numerals 3 and 4 the probes specified in table 7 are intended to simulate foreign objects which may be spherical. Where an enclosure has an indirect or tortuous entry path and there is any doubt about ingress of a spherical object capable of motion, it may be necessary to examine drawings or to provide special access for the object probe to be applied with the specified force to the opening(s) where ingress has to be
checked.

Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2.

Application:It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 12.5mm or greater.

Test sample:Easily accessible enclosure live parts or mechanical parts.

Feature:Steel ball, rigid test.

Parameters:

Picture view: