IEC 60592 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment

Browse Categories

Guangzhou HongCe Equipment Co., Ltd.

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-18933919125

Contact Person:
Ms.Tessa Huang View Contact Details

IEC 60592 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment

Brand Name	HongCe
Model Number	HH0820
Certification	Third part calibration certificate(cost additional)
Place of Origin	China
Minimum Order Quantity	1 set
Price	Negotiatable
Payment Terms	T/T
Supply Ability	20 set per month
Delivery Time	20 working days
Packaging Details	plywood
product name	IEC 60592 IPX1 to IPX8 Waterproof test system
Test	Protection against water
Drip test size	1000*600mm
Drip height	200mm
oscillating tube size	R400, R600, R800
nozzle diameter	IPX5: Ф6.3mm; IPX6: Ф12.5mm
IPX8 tank	diameter 0.8 meter, height 1 meter
Turntable diameter	Ø600mm

Detailed Product Description

IEC 60592 IPX1 to IPX8 Waterproof Ingress Protection Test Equipment

Standard:

IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3.

Application:

It is used to test the degrees of protection against ingress of water indicated by the second characteristic numeral.

IP Test Equipment

Second characteristic numeral	Degree of protection		Test conditions, see
Second characteristic numeral	Brief description	Definition	Test conditions, see
0	Non-protected	-	-
1	Protected against vertically falling water drops	Vertically falling drops shall have no harmful effects	1 4.2.1
2	Protected against vertically falling water drops when enclosure tilted up to 1 5°	Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angle up to 1 5° on either side of the vertical	1 4.2.2
3	Protected against spraying water	Water sprayed at an angle up to 60° on either side of the vertical shall have no harmful effects	1 4.2.3
4	Protected against splashing water	Water splashed against the enclosure from any direction shall have no harmful effects	1 4.2.4
5	Protected against water jets	Water projected in jets against the enclosure from any direction shall have no harmful effects	1 4.2.5
6	Protected against powerful water jets	Water projected in powerful jets against the enclosure from any direction shall have no harmful effects	1 4.2.6
7	Protected against the effects of temporary immersion in water	Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time	1 4.2.7
8	Protected against the effects of continuous immersion in water	Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7	1 4.2.8
9	Protected against high pressure and temperature water jets	Water projected at high pressure and high temperature against the enclosure from any direction shall not have harmful effects	1 4.2.9

Table 3 – Degrees of protection against water indicated by the second characteristic numeral

Parameter of IP Testing Equipment:

1. Protected against vertically falling water drops
Application	Applies to conduct IPX1, IPX2 testing.
Rain area	1000mmX600mm
Tank material	Stainless steel
Dripping aperture	Φ0.4mm
Hole distance	20mm
Rainfall Flow	1mm/Min, 3mm/Min, user-set parameters (error: + 0.5mm / min).
Water dripping height	200mm (automatically control by the test equipment)
Test time	10Min, can be set according to the need
Draining	Automatically emptying the tank water after the test is completed
Body material	Industrial aluminum alloy
Dimensions (LxDxH)	1100X1200X2600mm
Machine structure	Wall Mount
Air compressor (Optional, not included)	Silent air compressor
2. Protected against spraying and splashing water (oscillating tube)
Application	Applies to conduct IPX3, IPX4 testing.
Water supply	Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
The size of the oscillating tube	Standard coming with R400, R600, R800 oscillating tubes (other size R200,R1000,R1200,R1400,R1600mm can be optional), stainless steel
Water hole	Φ0.4mm.
Included angle of two holes	IPX3: 120°; IPX4: 180°
pendulum angle	IPX3: 120°; IPX4: 360°
Raining speed	IPX3: 4s/time(2×120°); IPX4: 12s/time(2×360°);
Water flow	Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole)
Testing time	0.01S～99 hours 59mins,can be preset
Pressure gauge	0~0.25MPa
Site requirements	Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation
The area	According to the oscillating tube chose
3. Protected against spraying and splashing water (Spray Nozzle)
Water supply	Water flow rate is 50～150kpa clean water without inclusion.
Spray nozzle parameters	external diameter: Ф102mm spherical diameter: SФ75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: Ф0.5mm It is made of brass.
Water flow	10L/min±5%, Flow meter is adjustable
Range of pressure gauge	0～0.4Mpa
Baffle	removable
Pressure gauge	0~0.25MPa
4. Protected against water jets and powerful water jets
Application	Applies to conduct IPX5, IPX6 testing.
Water supply	IPX5: Water flow rate ＞ 12.5L/min±5%; IPX6: Water flow rate ＞100L/min±5%; It can be achieved by the stainless steel water tank and pressurized equipment
The nozzle diameter	IPX5: Ф6.3mm; IPX6: Ф12.5mm
Water flow	IPX5: 12.5±0.625L/min, IPX6: 100±5 L/min; Flow meter is adjustable
The distance from jet nozzle to enclosure	2.5~3m
Testing time	Not less than 1min/m²(not less than 3 mins)
Pressure gauge	0~0.25MPa
5. Protected against the effects of temporary immersion in water and electrical control cabinet
Applicable	(a) Water supply for IPX1~IPX6 waterproof test (b) IPX7 water immersion test (c) Water storage for IPX8 water tightness test (d) Automatic control for the whole waterproof equipment
Water storage tank	It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX8, IPX7 immersion Volume:500L Dimension: W600mmXD660mmXH1300mm Observation window: toughened glass window Observation window dimension: W200mmXH1250mm Depth gauge: stainless steel Depth gauge height: 1200mm, accuracy 1mm Liquid level control: float switch + overflow pipe
Control Cabinet	Flow detection: flow signal feedback through electronic flowmeter Flow setting: set on touch screen Controller: PLC Control Function: constant flow water supply, constant pressure water supply, and test time control. Protection function: leakage protection, overload protection, short circuit protection
IPX7 immersion automatic lift bracket	Lifting distance: 0~1200mm Bracket dimension: L400mmXW400mm Bracket load weight: 50Kg
6. Protected against the effects of continuous immersion in water
Application	Applies to conduct IPX8 testing.
Pressure vessel	Stainless steel tank, diameter 0.8 meter, height 1 meter
Pressure adjustment range	0 ~ 6bar (can be customized)
Pressure system	Stainless steel pump + frequency converter
Pressure gauge accuracy	0.25 degree, range: 10bar
Testing time	0-99min
Maximum limit pressure	6 bar
Pressure protection	Pressure switch protection
7. Turntable
Turntable diameter	Ø600mm
Sample holder	Ø600mm
Turntable speed	1-5 rpm, adjustable
Tiltable angle	15°
Test angle of rotation	90° , continuous rotation
Adjustable height of the adjustable telescopic tube	300mm, 1200mm-1500mm
Body material	Industrial aluminum alloy

Product Tags: Waterproof Ingress Protection Test Equipment IPX8 Ingress Protection Test Equipment IPX1 Ingress Protection Test Equipment

Related Products

HH0803 Ingress Protection Test Equipment 121-Hole Precision Spray 10L/min Water Flow 150Kpa Pressure IPX3 and IPX4 Compliance Tester

IEC 60529 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment 500L Water Tank

IEC 60529 IPX5-6 Spray Test Equipment With Φ6.3mm And 12.5mm Nozzle 500L Tank

IEC 60592 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment

IEC 60529 Tiltable Rotating Stage Work With Waterproof Test Equipment Made Of Aluminum Alloy

15 Degrees Tiltable Rotating Stage Ingress Protection Test Equipment 1r/Min Ø600mm For IPX1-IPX6

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Guangzhou HongCe Equipment Co., Ltd.
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!