231 - 239 of 239
enclosure test finger probe
Selling leads
|
....2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3. Application: It is used to test the ...
2025-08-02 20:00:13
|
|
IEC60529 Ingress Protection Test Equipment Handheld Spray Nozzle Tester With 121 Holes Standard description: 15 Moisture resistance 15.1 The enclosure ...
2024-12-09 13:08:15
|
|
IEC60065 Figure 8 Steel Ball Impact Test Apparatus, Drop Height 0.5-1.5m Adjustable Moreover, the non-ventilated solid areas of the enclosure that ...
2024-12-09 13:52:17
|
|
...correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the ...
2024-12-09 10:47:48
|
|
...Testing Equipment Steel Ball Impact Test for Enclosure With 50mm Steel Sphere Standard of Apparatus For Ball Impact Tests: IEC 62368-1:2023 Audio...
2025-08-01 16:26:45
|
|
... and IPX4, IEC 60884-1, IEC 60335-1, IEC 60598-1. Application: It is used for the testing of IPX3 and IPX4. Test sample: The test apparatus with ...
2024-12-09 13:02:11
|
|
... and so on. It is used for testing the heat resistance of the electrical enclosure and external parts which are made up with the insulating ...
2024-12-09 10:55:33
|
|
...tests, it shall also be possible to make and break the switch by hand in the test circuit and the specimen shall not show: – wear impairing further ...
2024-12-09 17:30:39
|
|
... requirements like IEC884-1, IEC950 and so on. It is used for testing the heat resistance of the electrical enclosure and external parts which are ...
2024-12-09 11:18:09
|