151 - 160 of 239
enclosure test finger probe
Selling leads
|
... test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used ...
2024-12-09 22:22:38
|
|
...Safety – Part 1: General requirements clause 8.1.4; Application of IEC 60335-1 Testing Equipment: This device complies with the standard IEC60335-1 ...
2024-12-09 22:27:36
|
|
... and Structure The test device is suitable for electrical products’ sand and dust test of first characteristic numeral 5 and 6 (IP5 and IP6). It is ...
2024-12-09 12:06:27
|
|
IP Testing Equipment Test Probe A Made of Nylon Handle and Steel Ball IEC60529 IP1 Product introduction for IP Testing Equipment: This probe is ...
2024-12-09 22:22:12
|
|
...Test Probe 2 With Force of 30N, IP Code - IP2X The product is made of nylon and stainless steel. The nylon part of the handle is black, and the ...
2024-12-09 13:48:57
|
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-08-02 20:00:12
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
...a series of devices used to assess the extent of protection of persons against access to hazardous parts inside the enclosure and protection of the ...
2025-08-03 00:02:03
|
|
...Testing Equipment Open-Type Water Jetting Test for IPX5/ IPX6 Standard of IP Testing Equipment: IEC 60529: 2013 Degrees of protection provided by ...
2025-08-03 00:02:03
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|