1 - 10 of 18
cracked aluminum test comparator block
Selling leads
|
...Cracked Aluminum Test Blocks YM-A Aluminum226 Penetrant Comparator Block Through the physical and chemical test type A block material for LY12 ...
2024-12-09 22:38:20
|
|
penetrant calibration block test block PT test specimen developer,remover Model:YM-B All linear dimensions to the requirements of AS2083/2005, BS2704...
2024-12-09 18:45:33
|
|
...Block Magnetic Particles Cracked Test Piece EN ISO 9934-2:2002 Cracked Test Piece for the Evaluation of Magnetic Particles The MTU-3 Test Block is ...
2024-12-09 23:16:19
|
|
...sensitivity comparison of new and old penetrants. The test block has symmetrical defects on both sides A and B, and can be compared with different ...
2024-12-16 14:30:18
|
|
... of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Material: Test Report according to ISO 10474-3.1.B,JIS G ...
2024-12-09 22:08:10
|
|
... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The ...
2024-12-09 22:07:10
|
|
... Inspection Calibration Test Block Standard: ISO7963-2010 IIW2 test block (V-2 test block) is the standard test block approved by the International ...
2025-01-08 16:44:37
|
|
... test block approved by the International Welding Society. V-2 (DIN54122) compared with IIW test block, V-2 test block has the advantages of light ...
2024-12-09 22:48:39
|
|
...CALIBRATION BLOCK carbon steel 1018 IIW V2 calibration block Standard: ISO7963-2010 IIW2 test block (V-2 test block) is the standard test block ...
2024-12-09 22:23:20
|
|
Surface Roughness Comparator Contast Speciment Block This set contains standards of the six most important machining methods in the prevalent "AA" ...
2025-01-17 00:04:17
|