1 - 10 of 65
comparison standard penetration test block
Selling leads
|
... test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the ...
2024-12-16 14:30:17
|
|
... accuracy of the penetrant. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning ...
2024-12-16 14:30:18
|
|
...DPI system performance. Reference block type 2 is made from stainless steel plated with a layer of nickel then a hard Chromium alloy. Five star...
2025-07-10 07:30:29
|
|
... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The ...
2024-12-09 22:07:10
|
|
...) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard...
2024-12-09 18:45:33
|
|
...Block Penetrant Testing Specimen YM-B(B3) Depth 100μm Width Target Value 0.5μm Model:YM-B(B3) All linear dimensions to the requirements of AS2083...
2024-12-09 23:42:24
|
|
...Block Penetrant Testing Specimen YM-A Aluminum Alloy Material Through the physical and chemical test type A block material for LY12 aluminum alloy ...
2024-12-09 23:42:24
|
|
... Inspection Calibration Test Block Standard: ISO7963-2010 IIW2 test block (V-2 test block) is the standard test block approved by the International ...
2025-01-08 16:44:37
|
|
...used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the ...
2024-12-09 11:10:00
|
|
...Block 90° Curved 5-Step Block for thickness and linearity calibration of curved surface Specifications: Calibration blocks is an important ...
2024-12-09 11:10:00
|